Thermal insulation system

External Thermal Insulation Composite System (ETICS) Boroterm^®

Purpose: External Thermal Insulation Composite System (ETICS) Boroterm^® is designed for external insulation of old and new buildings.

Composition:

External thermal insulation composite system Boroterm® consists of carefully selected complementary elements:

- Adhesive for thermal insulation panels – BORO TERACOL for thermal insulation 2 - production of "BORO TERACOL" Ltd.

- Thermal insulating panels of expanded polystyrene - production of an external company under the trademark of "BORO TERACOL" Ltd.

- Adhesive putty for thermal insulation panels – BORO TERACOL for thermal insulation - production of "BORO TERACOL" Ltd.

- Adhesive putty for thermal insulation panels – BORO TERM ECO - production of "BORO TERACOL" Ltd.

- Reinforcing fiberglass mesh - production of an external company under the trademark of "BORO TERACOL" Ltd.

- Dowels - production of an external company.

FINISHING COATINGS - production of "BORO TERACOL" Ltd.

- Impregnating primer – Boroprimer deeply penetrating

- Silicone primer for plasters – Boroprimer 10

- Decorative silicone plaster with a scratched structure S1.5; S2; S3

- Decorative polymer plaster with a scratched structure S1.5; S2; S3

- Decorative silicone plaster with a dragged structure D1.2; D2; D3

- Decorative polymer plaster with a dragged structure D1.2; D2; D3

- Decorative silicone relief plaster

- Scratched mortar SC 150

- Dragged mortar DR 200

- Borolex silicone-acrylic Facade Paint

- Borolex Acrylic Facade Paint

Advantages:

- High thermal insulation properties

- Excellent resistance to weathering and chemical polluted environments

- High crack resistance

- High resistance to mechanical loads

- Optimal vapor permeability to maintain optimal humidity and assist the drying process, especially for new construction

- High light resistance of color products

- High water resistance and water repellence

- Resistance to microorganisms, fungi and mildew

CODE:

40mm - CODE: ETICS-EPS-EN 13499-1,20-F-I2-PE 200

50mm - CODE: ETICS-EPS-EN 13499-1,45-F-I2-PE 200

80mm - CODE: ETICS-EPS-EN 13499-2,35-F-I2-PE 200

100mm - CODE: ETICS-EPS-EN 13499-2,85-F-I2-PE 200

External Thermal Insulation Composite System (ETICS) BOROTERM® is in accordance with:

- BS EN 13499

- Introduced and certified production control system – certificate production control №12- NSISOSSP-1456 issued by the Center for Testing and European Certification - Stara Zagora

- Regulation (EC) № 305/2011 laying down harmonized conditions for the marketing of construction products

- Law on Protection against the harmful effects of chemicals / SG issue 114, 2003/

- Ordinance on limiting emissions of volatile organic compounds in the use of organic solvents in certain paints, varnishes and vehicle refinishing products / SG issue 20 of 6.03.2007/

- Ordinance on the manner of classification, packaging and labeling of chemical substances and preparations / SG issue 66, 2004 /

- European Directive 2004/42 on the limitation of emissions of volatile organic compounds in certain paints, varnishes and vehicle refinishing products

- Regulation (EC) № 1272/2008 on classification, packaging, labeling of chemical substances and mixtures

- Regulation (EC) 453/2010 on the Registration, Evaluation, Authorization and Restriction of Chemicals / REACH /

1. Adhesive for thermal insulation panels – BORO TERACOL for thermal insulation 2

2. Thermal insulation panels

3. Dowels for thermal insulation panels (it is recommended that the use of a minimum 6 pieces per / m²)

4. Reinforcing fiberglass mesh

5. Adhesive putty for thermal insulation panels – BORO TERM ECO

6. Primer - primer for plasters (Boroprimer 10) or Boroprimer deeply penetrating (when finishing coating is Facade latex)

7. Finishing coating:

- Decorative polymer plaster with a scratched and dragged structure

- Decorative silicone plaster with a scratched and dragged structure

- Facade Paint (acrylic and silicone-acrylic)

- Decorative silicone relief plaster

- Dry mortar with scratched and dragged structure

Advantages of external thermal insulation composite system Boroterm®:

- allows the wall to “breathe”

- coloring in over 20 000 UV resistant colors

- weather resistant

- ecologically clean

- excellent vapor permeability

- excellent thermal insulation properties

- there are no thermal bridges

Exemplary external thermal insulation composite system Boroterm® with silicone plaster:

TERACOL for thermal insulation 2 - For bonding thermal insulation panels made of extruded and expanded polystyrene: styrofoam, fibran, styrodur, monodur etc., and mineral wool. Hydro and frost resistance. It contains monofilaments.

Thermal insulation panels made of EPS - the material has a very good vapor permeability and its structure allows "breathing" of the building structure, thereby effectively prevents accumulation of condensation and mold, both in within the construction and in the premises. The panels have very good thermal insulation properties, precise sizes and resistant to aging. They do not change shape and do not shrink.

Dowels for thermal insulation panels - suitable for attaching hard insulation materials, such as styrofoam, EPS insolation slabs and others in foundations of concrete, aerated concrete, solid and hollow bricks (it is recommended that the use of a minimum 6 pieces per / m²).

Reinforcing fiberglass mesh - it is designed for reinforcement of putty coat layer on the insulating boards EPS-F at thermal insulation of facades of buildings. Reinforced by fiberglass mesh prevents the formation of cracks and splintery in the surface and also prevents damage of plaster.

TERACOL for thermal insulation - For bonding and puttying on thermal insulation panels made of extruded and expanded polystyrene: styrofoam, fibran, styrodur, monodur etc., and mineral wool. For making thin layer puttying on them. Hydro and frost resistance. It contains monofilaments.

Boroprimer 10 - For priming before applying the polymer, silicone plaster, light mineral plasters as well as on flat bases as concrete, cement putty, solid foundations of emulsion paints, reinforced surfaces for thermal insulation systems and others. Resistant to weathering, with excellent adhesion and strength.

Silicone plaster - Paste-like thin-layer plaster, ready for application. With very good vapor permeability and excellent water resistance. The applied decorative coating is resistant to aging, weathering, industrial gases, fungi, molds and bacteria. For decoration of facades. Apply on gypsum and cement-lime plaster, external thermal insulation composite system (ETICS), plasterboard, concrete.

At the request of the customer, finishing coat can be: